 
 
|
|
Markers |
Home  Anodising
AnodisingWe can anodise pretty much any colour to any Aluminium part in either a Dust or polish finish. Fades, laser engraving, and custom graphics can also be applied. If you have a specific colour you want us to match feel free to send a sample and we’ll match it as best we can. The pricing scheme we use is very simple, we charge one set up fee per job and then just £6 per part you want anodised. Our set up fee’s are as follows:
If you would like to change the finish on a part from a polish finish to a dust finish, please add an extra £1 for each part the finish change is required on. If you would like to change a part from a dust or neutral finish to a high gloss polish finish please add £2 per part that the finish is required on. All parts for anodising must be sent to us fully disassembled, with all stickers, o-rings and screws removed. The number of ‘parts’ is the number of component pieces the gun breaks down to. For example a Reg could break down to 3 or 4 parts. Laser engraving is charged at £35 for one logo, £50 for two logo’s, and between £70 and £110 for large images and complete gun designs. Return Carriage is free! A strip and re-build service is also available on Matrix, Ego, and Autococker Markers. Labour for this is charged at £35 per hour. If you would like to go ahead just fill in the Anodising request form which is HERE, and send it along with the parts to… Slothstuff If you have any Questions or Queries feel free to send them to anodising@slothball.com and we’ll get back to you as soon as possible. |
We are affiliated to:
|
 |
FAQ - Terms of Sale
- Data Protection (Privacy) -
Returns & Exchanges  © SlothStuff 2005-2007 All rights reserved |
